In this post, we are going to deploy Office 365 application through SCCM. Starting with SCCM 1806, Office Customization tool is integrated with Office 365 Installer. Hence you don’t need to download OCT (Office Customization tool) to further download the Office 365 binaries. This will be taken care by Office 365 Installer only.
Read moreSCCM
IP Helper-Address Configuration for PXE Boot
To support BIOS & UEFI Firmware based hardware, we need to execute following commands on Cisco Switch (Global Configuration Mode):
IP helper-address <IP address of DHCP server>
IP helper-address <IP address of WDS server>
IP forward-protocol UDP 4011
CONFIGURATION of IP Helper Tables explained
When the PXE client PC, the DHCP server, and WDS Server, are located on different subnets or vlans, IP helper tables need to be set up in the routers/switches so that the PXE network requests can be routed correctly to the appropriate server. Once the PXE network requests are routed correctly. the appropriate servers can answer. Requirement here is:
- Client to get IP address from DHCP Server
- Directing a client to appropriate Network Boot Program (wdsnbp.com or wdsmgfw.efi)
SCCM 1902 Step by Step Upgrade Guide
This post will cover the installation of SCCM 1902.
Microsoft has released new Baseline version ie 1902 for SCCM Current Branch, this version is also available as In-console update if your sites are running on version 1710, 1802, 1806 or 1810.
Deploy Office 2016 through SCCM
In this post we are going to create application for Office 2016 which can be deployed through SCCM. Before doing anything on SCCM, we need to customize the Office 2016 setup so that it can install the required components silently (without any user interaction).
[Read more…] about Deploy Office 2016 through SCCMConfiguring Boundaries for SCCM
In this post we are going to cover the configuration of Boundaries setup as part of SCCM Current Branch Installation Guide series
Why do we need Boundaries ?
Boundaries are required for 2 purposes:
- Site Assignment – Clients will get policies when assigned to a specific SCCM Site.
- Content Location – Clients will get the content from distribution point, hence proper boundaries should be defined so that they can get the content from appropriate source.
SCCM Automatic Client Push Installation
This post is part of SCCM Current Branch Installation Guide series.
In this post we are going to enable Client push through SCCM which will install SCCM client to all systems. Once Client is installed, they can communicate with SCCM Server to get the policies for deploying applications, patches & other stuff.